This universal 20’’ scaffolding bracket can fit on 4 different bolt spacings as shown in the second picture. It attaches on 2 bolts on panel bars. It is offered with a pocket to install a guard rail for working at heights, see the options below.

Specifications available on request.
Option :
2’’x 4’’ Pocket (A) #092-C20244
2’’x 2’’ Pocket (B) #092-C20242

This 20’’ scaffolding bracket model is available in Aluminum or in Steel. It fits on any panel. It offers 2 attaching systems. It can be attached to 2 bolts or, 1 bolt with a nail fixed to the bottom. It is offered with a pocket to install a guard rail for working at heights, see the options below.

Specifications available on request.
Option : Aluminum or Steel
2’’x 4’’ Pocket (A)
2’’x 2’’ Pocket (B)

This 20’’ scaffolding bracket fits on any panel. The top is attached to a bolt on the panel and the bottom can be fixed with a nail. It is offered with a pocket to install a guard rail for working at heights, see the options below.

Specifications available on request.
Option :
2’’x 4’’ Pocket (A) #092-C20104
2’’x 2’’ Pocket (B) #092-C20102

This panel with round bars is compatible with both column systems. It is available in 7 sizes with a 3” variation width offered by the notches at each end of the round bar.

Width available
12’’ 3/8
14’’ 3/8
16’’ 3/8
18’’ 3/8
20’’ 3/8
22’’ 3/8 –>assembled with 9 bars
24’’ 3/8 –>assembled with 9 bars
Lengths available
10’’-11’’-12’’
12’’-13’’-14’’
14’’-15’’-16’’
16’’-17’’-18’’
18’’-19’’-20’’
20’’-21’’-22’’–>assembled with 9 bars
22’’-23’’-24’’–>assembled with 9 bars

*This filler is compatible with both systems

Upon request, the panels or column fillers can be cut to the desired height. However, the distance between bars remains the same on the panel, as shown on the picture opposite, whether it’s the two latch bars or the round rods.

Maximum height is 10’.

*This panel is compatible with system 1 only